Add profiles and place them on the floor plan

Profiles are the thresholds and trims on a job. Say which rooms they go in, then place each one on its doorway on the floor plan.

Add a profile

1. On the job page, open Profiles (under Not on this job: if it’s empty) and add one.
2. Choose the Finish (Silver, Gold, Chrome, Brass, Nickel or Custom), the Type (for example Single, Double, Cover strip, Stair nosing, T-profile, Reducer strip) and the Length.
3. Enter the price each, or a price per metre.
4. Tap Rooms and set how many go in each room. Any you don’t put in a room count as Not in a room: spares, or ones you’ll place later.

The quantity charged is the total across the rooms plus the ones not in a room.

Place them on the floor plan

1. In the floor plan, tap Place profiles on the toolbar. The Profiles panel opens.
2. Each profile lists its rooms, with how many are placed, for example “1 of 2”.
3. Tap Place beside a room. The profile goes on the room’s longest free wall if it fits; if not, the app asks you to tap a wall.
4. Drag a placed profile along its wall to the doorway.

Once placed, the button reads View and zooms to the profile. You can add a new profile from the same panel; it’s the same as adding it on the job page.

Good to know

• A doorway between two rooms counts for the room whose wall you tapped.
• Place a profile in a room that isn’t on its list and the app adds that room, or uses a spare, and tells you, with Undo.
• You can’t lower a room’s quantity below the number already placed on the plan.
• If a room’s shape changes, its profiles stay on the matching walls.
• Profiles placed in rooms can also cut down your gripper: switch on Leave out doorways on the gripper.